Clear water pump
is used for conveying clean water and other liquids with physical and chemical
properties similar to clean water. It is suitable for industrial and urban water
supply and drainage, pressurized water supply in high-rise buildings, garden
sprinkler irrigation, fire pressurization, long-distance transportation, HVAC
refrigeration cycle, farmland irrigation, bathroom and other cold and warm water
circulation pressurization and equipment matching.
Characteristics of clean
water pump:
Relatively good performance, with powerful motor device and
reasonable body design, high efficiency and low noise. The location of the
waterway is treated uniquely, which not only prevents corrosion and rust, but
also has good wear resistance.
It has economic, practical, energy-saving
design, and reasonable price.
Easy to set up and install, easy to use, with
the use of new process design, promoting simple installation and convenient
maintenance. It has a self priming function.
Common types of clean water
pumps:
Self priming clean water pump: With good water resource quality and
relatively fixed operating position, the suction head is within 3.5 meters, and
the pipeline is stable. When used for daily water supply in wells and irrigation
in plantations, it can reduce the inconvenience of water injection during
pumping. The actual pump head is within 22 meters, and the working efficiency of
chemical pumps is slightly weaker. When putting into operation for the first
time, it is necessary to first inject circulating and emptying water before the
water pump can start self priming.
Water injection type clean water pump:
Water resources and water bodies have good mobility, and the pipeline is
relatively not fixed. The actual pump lift within 2.5 meters is within 32
meters, and the pump flow can be adjusted according to demand. It is suitable
for fruit planting professionals to spray pesticides and water supply, with high
work efficiency. The suction pipe should ensure good sealing.
Submersible
clean water pump: With abundant water resources, the pump has a low head and
valves are more suitable for irrigation in fields and plantations that require a
large amount of water. Due to the fact that the entire equipment of the
submersible pump is placed in the water inlet and the axial water pushing
increases, reducing the water flow rate will increase the pump load. Therefore,
it is not necessary to install a valve in the drainage pipe of the submersible
pump to avoid burning the motor due to excessive resistance when starting the
pump due to valve shutdown.
