The advantage of using diaphragm pump is
that it is easy to install and use, and there is no need to monitor the
operating parameters at all times. It can operate without fault for a long time,
and there is no excessive vibration and noise interference in the process of
use. It is a reliable new type of high-performance pump. Because of its wide
versatility, it can have good adaptability even if the working conditions
change. It is a high cost-effective transportation pump.
Diaphragm pump is a
new type of pump, which overcomes many shortcomings of traditional water pump.
For the benefits of using diaphragm pump, please refer to the following
points.
1. It can be used away from the motor. There are no potential safety
hazards such as electric leakage in flammable and explosive fields. It is easy
to carry and can be used in various remote areas;
2. Idling for a long time
does not generate heat and does no damage to the pump. There is no need to
arrange special personnel to monitor. Due to the light volume, the vibration
during operation is also very slight;
3. With reliable comprehensive
performance, it can dive, self absorb, prevent leakage, transport chemical
liquid, and transport viscous liquid like screw pump;
4. The installation of
pneumatic diaphragm pump does not need foundation and does not occupy too much
space. If necessary, it can be directly immersed in liquid for use;
5. High
safety, no crash, overclocking or overload caused by overload operation,
self-protection function, simple and convenient operation in daily use;
6. It
can be customized. EVP pump's pneumatic diaphragm pump products support a
variety of pump materials such as engineering plastics, stainless steel, cast
iron and alloy for different transportation conditions;
7. The internal
structure of the pneumatic diaphragm pump has been optimized and can be used for
a long time without worrying about wear. However, the diaphragm is a consumable
and it is recommended to check it regularly.
After understanding the benefits
of using diaphragm pump, it should be noted that pneumatic diaphragm pump is
limited by air source pressure, and the pump pressure of most models and
specifications can only reach 6bar. If there is higher demand for flow, pressure
and other parameters, electric diaphragm pump can be considered. If you have
special transportation needs, you can also contact EVP pump industry in advance
to customize the pump body.
2/07/2022
Benefits of using diaphragm pumps
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment