The filter element of vacuum pump has three main filtering forms in the operation of the imported vacuum pump. The filter element of vacuum pump is the filter equipment in the vacuum pump and an important working part of the filter. The filter effect is mainly determined by the performance of the filter element. In cleaning and replacement, there are a lot of people do not make a point, often wasted effort, but did not receive better results. The following contents of the import vacuum pump manufacturers for your simple vacuum pump filter maintenance method.
1. Oil filter core (used for filtering lubricating oil of imported vacuum pump to extend the service life of oil)
2. Air inlet filter element (can effectively prevent solid particles and fine ash from being sucked into the vacuum pump. Reduce mechanical wear and improve reliability of operation. It can extend the service life of the pump and protect the system components effectively.
Three, exhaust filter core (take into account exhaust resistance, dust capacity, oil and gas separation performance, the three requirements to achieve an optimal balance. Different materials are used in different internal and external positions to achieve different separation purposes.
Usage and maintenance:
First, carefully remove the spring and felt pads, and then take out the paper core.
Loosen the knob bolt to separate the filter housing from the head. Be careful not to lose the rubber seal ring and the fiber washer.
3. Use a brush to remove dust and foreign matters in the creases of the filter core, and then gently pat it flat to make the remaining dust fall, and wipe off the dust on the inner wall of the shell and the dust on the fiber mat.
Screw vacuum pump in the pull rod
Rotary vane vacuum pump in sintering
Rotary vane vacuum pump in offshore heavy oil field
Vacuum pump in demineralized brine
No comments:
Post a Comment